Documentação > Códigos de erros MegaCli

545 Views

Megacli é o utilitário de linha de comando que provê comunicação com placas controladoras da família LSI. A LSI fornece placas controladoras para hardware Supermicro e Dell, entre outros.

O problema do MegaCli é que ele é muito chato. Os parâmetros são difíceis de memorizar e as saídas de erro são feitas com códigos.

Logo falarei sobre o MegaCli. Por ora, segue a relação de códigos de erros do dito cujo.

– 0x00: Command completed successfully
– 0x01: Invalid command
– 0x02: DCMD opcode is invalid
– 0x03: Input parameters are invalid
– 0x04: Invalid sequence number
– 0x05: Abort isn’t possible for the requested command
– 0x06: Application ‘host’ code not found
– 0x07: Application already in use – try later
– 0x08: Application not initialized
– 0x09: Given array index is invalid
– 0x0a: Unable to add missing drive to array, as row has no empty slots
– 0x0b: Some of the CFG resources conflict with each other or the current config
– 0x0c: Invalid device ID / select-timeout
– 0x0d: Drive is too small for requested operation
– 0x0e: Flash memory allocation failed
– 0x0f: Flash download already in progress
– 0x10: Flash operation failed
– 0x11: Flash image was bad
– 0x12: Downloaded flash image is incomplete
– 0x13: Flash OPEN was not done
– 0x14: Flash sequence is not active
– 0x15: Flush command failed
– 0x16: Specified application doesn’t have host-resident code
– 0x17: LD operation not possibe – CC is in progress
– 0x18: LD initialization in progress
– 0x19: LBA is out of range
– 0x1a: Maximum LDs are already configured
– 0x1b: LD is not OPTIMAL
– 0x1c: LD Rebuild is in progress
– 0x1d: LD is undergoing reconstruction
– 0x1e: LD RAID level is wrong for requested operation
– 0x1f: Too many spares assigned
– 0x20: Scratch memory not available – try command again later
– 0x21: Error writing MFC data to SEEPROM
– 0x22: Required HW is missing (i.e. Alarm or BBU)
– 0x23: Item not found
– 0x24: LD drives are not within an enclosure
– 0x25: PD CLEAR operation is in progress
– 0x26: Unable to use SATA(SAS) drive to replace SAS(SATA)
– 0x27: Patrol Read is disabled
– 0x28: Given row index is invalid
– 0x2d: SCSI command done, but non-GOOD status was received – see mf.hdr.extStatus for SCSI_STATUS
– 0x2e: IO request for MFI_CMD_OP_PD_SCSI failed – see extStatus for DM error
– 0x2f: Matches SCSI RESERVATION_CONFLICT
– 0x30: One or more of the flush operations failed
– 0x31: FW real-time currently not set
– 0x32: Command issues while FW in wrong state (i.e. GET RECON when op not active)
– 0x33: LD is not OFFLINE – IO not possible
– 0x34: Peer controller rejected request (possibly due to resource conflict)
– 0x35: Unable to inform peer of communication changes (retry might be appropriate)
– 0x36: LD reservation already in progress
– 0x37: I2C errors were detected
– 0x38: PCI errors occurred during XOR/DMA operation
– 0x39: Diagnostics failed – see event log for details
– 0x3a: Unable to process command as boot messages are pending
– 0x3b: Returned in case if foreign configurations are imcomplete
– 0x3d: Returned in case if a command is tried on unsupported hardware
– 0x3e: CC scheduling is disabled
– 0x3f: PD CopyBack operation is in progress
– 0x40: Selected more than one PD per array
– 0x41: Microcode update operation failed
– 0x42: Unable to process command as drive security feature is not enabled
– 0x43: Controller already has a lock key
– 0x44: Lock key cannot be backed-up
– 0x45: Lock key backup cannot be verified
– 0x46: Lock key from backup failed verification
– 0x47: Rekey operation not allowed, unless controller already has a lock key
– 0x48: Lock key is not valid, cannot authenticate
– 0x49: Lock key from escrow cannot be used
– 0x4a: Lock key backup (pass-phrase) is required
– 0x4b: Secure LD exist
– 0x4c: LD secure operation is not allowed
– 0x4d: Reprovisioning is not allowed
– 0x4e: Drive security type (FDE or non-FDE) is not appropriate for requested operation
– 0x4f: LD encryption type is not supported
– 0x50: Cannot mix FDE and non-FDE drives in same array
– 0x51: Cannot mix secure and unsecured LD in same array
– 0x52: Secret key not allowed
– 0x53: Physical device errors were detected
– 0x54: Controller has LD cache pinned
– 0x55: Requested operation is already in progress
– 0x56: Another power state set operation is in progress
– 0x57: Power state of device is not correct
– 0x58: No PD is available for patrol read
– 0x59: Controller resert is required
– 0x5a: No EKM boot agent detected
– 0x5b: No space on the snapshot repositiry VD
– 0x5c: For consistency SET PiTs, some PiT creations might fail and some succeed
– 0xFF: Invalid status – used for polling command completion